崔向阳：男，博士，研究生导师

通讯地址：湖南大学汽车车身先进设计制造国家重点实验室

邮政编码：410082

联系电话：18673190717

电子信箱：cui435@163.com

学科专业领域及主要研究方向

学科领域：车辆工程，计算力学，材料成形，机械设计及理论

主要研究方向：新型数值算法、无网格技术、板壳单元、材料成形数值模拟、汽车CAE技术、数值传热及热加工模拟

学术兼职

国际计算力学学会会员

国际杂志“International Journal for Numerical Methods in Engineering”评审

国际杂志“International Journal of Applied Mechanics”评审

国际杂志“Journal of Soundand Vibration”评审

国际杂志“Engineering Analysis with Boundary Elements”评审

学习经历及背景

2009.8－2011.7湖南大学汽车车身先进设计制造国家重点实验室，博士研究生，课题方向：先进数值算法开发，工程中的强非线性问题，新型板壳单元开发及其在金属成型与车身技术的应用，导师：Prof.Guang-YaoLi(李光耀教授)&Prof.Gui-RongLiu

2007.8－2009.8新加坡国立大学机械工程系，首期国家公派湖南大学与新加坡国立大学联合培养博士留学生，课题方向：先进数值算法开发，工程中的强非线性问题，新型板壳单元开发及其在金属成型与车身技术的应用，导师：Prof.Guang-YaoLi(李光耀教授)&Prof.Gui-RongLiu

2005.9－2007.8湖南大学汽车车身先进设计制造国家重点实验室，硕士研究生，方向：汽车CAE技术，导师：Prof.Guang-YaoLi(李光耀)

2001.9－2005.7湖南大学机械与汽车工程学院，机械设计制造及其自动化专业，本科

工作经历

2009.10－今，湖南大学汽车车身先进设计制造国家重点实验室，讲师

2009.10－今，湖南大学机械与运载工程学院，讲师

软件著作权与专利

[1]基于区域光滑的板壳结构计算系统(DSPSV1.0)。软件著作权(登记证书编号：2011SR001980)

[2]刘迪辉，李光耀，崔向阳，郑刚.一种基于曲面边缘线或截面线网格映射的回弹补偿面生成方法。发明专利（公开号：CN101546349）

[3]刘迪辉，李光耀，崔向阳,郑刚,干年妃.一种基于截面线分析的点云与几何数模对齐方法。发明专利（公开号：CN101561834）

[4]刘迪辉，李光耀，龚志辉,崔向阳.一种基于有限元方法的确定薄板冲压件测量点云在回弹前位置的方法。发明专利（公开号：CN101482403A）

主持项目

国家自然科学基金青年基金：连续性二次松弛三角形薄板壳元研究及其在车身设计中的应用(项目编号：11002053)（研究期限：2011.01-2013.12）

汽车车身先进设计制造国家重点实验室自主课题人才培育项目：用于金属塑性成形分析的低阶单元研究(项目编号：51075005)（研究期限：2011.01-2012.12）

湖南省研究生创新基金：用于车身设计仿真的三角形板壳单元研究(项目编号：CX2010B126)（研究期限：2010.01-2011.12）

汽车车身先进设计制造国家重点实验室自主课题重点项目子课题：回弹问题中的高应力精度单元研究（研究期限：2009.09-2010.12）

湖南大学青年教师科技创新扶持项目：新型数值算法研究及其在车身设计中的应用（2010.01-2011.12）

参与项目

国家重点基础研究发展计划“973”计划：现代设计大型应用软件的可信性研究（项目编号：2010CB328005）（研究期限：2010.1-2014.08）

杰出青年基金项目:塑性加工工艺与装备（项目编号：50625519）（研究期限：2006.01-2010.12）

国家自然科学基金重点项目：工程与产品现代设计理论与方法（项目编号：60635020）（研究期限：2006.01-2010.12）

会议报告

[1]Cui X.Y, Li G.Y. Novel method for thin plate formulation constructing using Galerkin approximation. Annual Meeting of the Singapore Association of Computational Mechanics (SACM), Singapore, 2009. (会议报告，Invited Talk)

[2]Cui X.Y, Liu G.R, Li G.Y. A slope-restructured method for thin plate problems with linear deflection field. BICTAM International Symposium on Meshfree/Meshless, Particle and Generalized/Extended Finite Element Methods, pp.11-22, Nanjing, PR China, 2009. (会议论文及报告)

[3]Li G.Y, Cui X.Y. Smoothed Element free Galerkin method. BICTAM International Symposium on Meshfree/Meshless, Particle and Generalized/Extended Finite Element Methods, pp.63-76, Nanjing, PR China, 2009. (会议论文及报告)

[4]Cui X.Y, Zheng G., Li G.Y. An efficient triangular shell element based on edge-based smoothing technique for sheet metal forming simulation. NUMIFORM 2010: The 10th International Conference on Numerical methods in Industrial Forming Processes, AIP Conf. Proc. 1252: 1118-1125, Korea, June 13-17, 2010. (会议论文及报告)

[5]Cui X.Y, Li G.Y., Zheng G., Fang Z. Cell-based Smoothed Radial Point Interpolation Method for contact problems in metal forming analysis. The 13th International Conference on Metal Forming, Steel research International 2010; 81(9): 1486-1489. Toyohashi, Japan, September 19-22, 2010. (会议论文及报告)

[6]Cui X.Y, Li G.Y. Novel thin plate formulation without rotation DOFs based on Galerkin approximation. WCCM/APCOM 2010, Sydney, July 19-23, 2010. (会议报告)

[7]Cui X.Y, Li G.Y. Advanced analysis and applications of Gradient smoothing methods. International Conference on Computational Methods, Zhangjiajie, China, November 15-17, 2010. (会议报告)

[8]崔向阳. 用于汽车CAE分析的新型三角形板壳单元. 中国力学大会2011-暨钱学森诞辰100周年纪念大会, 哈尔滨, 2011年8月22~24日.

已发表和录用的学术论文

[1]Cui X.Y（崔向阳）, Liu G.R, Li G.Y, Zhao X, Nguyen T.T, Sun G.Y. A smoothed finite element method (SFEM) for linear and geometrically nonlinear analysis of plates and shells. CMES- Computer Modeling in Engineering& Sciences 2008; 28(2): 109-126. (SCI, EI)

[2]Cui X.Y（崔向阳）, Liu G.R, Li G.Y, Zheng G. A rotation free formulation for static and free vibration analysis of thin beams using gradient smoothing technique. CMES- Computer Modeling in Engineering& Sciences 2008; 38(3): 217-229. (SCI, EI)

[3]Cui X.Y（崔向阳）, Liu G.R, Li G.Y, Zhang G.Y, Sun G.Y. Elasto-plasticity analysis using edge-based smoothed finite element method (ES-FEM). International Journal of Pressure Vessels and Piping 2009; 86：711-718. (SCI, EI)

[4]Cui XY（崔向阳）, Liu GR, Li GY. A cell-based smoothed radial point interpolation method (CS-RPIM) for static and free vibration of solids. Engineering Analysis with Boundary Elements 2010; 34: 144-157. (SCI, EI)

[5]Cui X.Y（崔向阳）, Liu G.R, Li G.Y, Zhang G.Y, Zheng G. Analysis of plates and shells using an edge-based smoothed finite element method. Computational Mechanics 2010; 45: 141-156. (SCI, EI)

[6]Cui X.Y（崔向阳）, Li G.Y, Zheng G. Novel thin plate element theory based on a continuity re-relaxed technique. Science China: Technological Sciences 2010; 53: 2450-2457. (SCI, EI)

[7]Cui X.Y（崔向阳）, Liu G.R, Li G.Y. Analysis of Mindlin-Reissner plates using cell-based smoothed radial point interpolation method. International Journal of Applied Mechanics 2010; 2 (3): 653-680. (SCI)

[8]Cui X.Y（崔向阳）, Li G.Y, Zheng G., Wu S.Z. NS-FEM/ES-FEM for contact problems in metal forming analysis. International Journal of Material Forming 2010; 3: 887-890. (EI)

[9]Cui X.Y（崔向阳）, Liu G.R, Li G.Y, Zhang G.Y. A thin plate formulation without rotation DOFs based on the radial point interpolation method and triangular cells. International Journal for Numerical Methods in Engineering 2011; 85(8): 958-986.(SCI, EI)

[10]Cui X.Y（崔向阳）, Liu G.R, Li G.Y. Bending and vibration responses of laminated composite plates using an edge-based smoothing technique. Engineering Analysis with Boundary Elements 2011; 35(6): 818-826. (SCI, EI)

[11]Cui X.Y（崔向阳）, Liu G.R, Li G.Y. A smoothed Hermite radial point interpolation method for thin plate analysis using gradient smoothing operation. Archive of Applied Mechanics 2011; 81(1): 1-18. (SCI)

[12]Cui X.Y（崔向阳）, Li G.Y. Nodal integration thin plate formulation using linear interpolation and triangular cells. International Journal of Computational methods 2011,8: 813-824. (SCI, EI)

[13]Cui X.Y（崔向阳）, Li G.Y. Smoothed Galerkin methods using cell-wise strain smoothing technique. Engineering Analysis with Boundary Elements 2012; 35(6): 825-835. (SCI, EI)

[14]Cui X.Y（崔向阳）, Liu G.R, Li G.Y. A curvature-constructed method for bending analysis of thin plates using 3-node triangular cells. International Journal of Computational methods 2011. (已接收) (SCI, EI源刊)

[15]Zheng G., Cui X.Y（崔向阳）, Li G.Y, Wu S.Z. A linearly conforming radial point interpolation method (LC-RPIM) for contact problems in metal forming analysis. International Journal of Material Forming 3: 891-894, 2010.（EI）

[16]（崔向阳）, Li G.Y, Wu S.Z. An edge-based smoothed triangle element for non-linear explicit dynamic analysis of shells. Computational Mechanics,2011; 48(1): 65-80. (SCI, EI)Zheng G, Cui X.Y

[17]Wu S.C., Liu G. R., Cui X.Y（崔向阳）. An Edge-based Smoothed Point Interpolation Method (ES-PIM) for Heat Transfer Analysis of Rapid Manufacturing System. International Journal of Heat and Mass Transfer 2010;53: 1938-1950. (SCI, EI)

[18]Yao L.Y, Yu D.J, Cui X.Y（崔向阳）, Zang X.G. Numerical treatment of acoustic problems with the smoothed finite element method. Applied Acoustics 2010; 71: 743-753. (SCI, EI)

[19]Sun G.Y, Li G.Y, Gong Z.H, Cui X.Y（崔向阳）, Li Q. Multiobjective robust optimization method for drawbead design in sheet metal forming. Material & Design 31: 1917-1929, 2010. (SCI, EI)

[20]He Z.C, Liu G.R, Zhong Z.H, Cui X.Y（崔向阳）, Zhang G.Y, Cheng A.G. A coupled edge-/face-based smoothed finite element method for structural-acoustic problems. Applied Acoustics 2010; 71: 955-964. (SCI, EI)

[21]崔向阳, 李光耀, 徐峰祥. 基于一种新型三角形壳元的汽车车身部件模态分析研究. 机械工程学报 2011; .47(6): 101-106.（EI检索）

[22]崔向阳, 李光耀. 基于边光滑有限元法的剪切变形板几何非线性分析. 计算机辅助工程 2011; 20(1): 155-162.