材料物理与化学专业导师田艳中

田艳中，工学博士，副研究员

1984年出生于河南省漯河市

2015年度“所优秀学者”，硕士生导师

< 联系方式 >

所属部门：沈阳材料科学国家(联合)实验室,材料疲劳与断裂研究部

办公电话：024-83978779

E-mail：yztian@imr.ac.cn

个人学术主页：https://www.researchgate.net/profile/Yanzhong_Tian

< 教育和工作经历 >

2002.09-2006.07

天津大学，材料科学与工程学院，金属专业，工学学士

南开大学，经济学院，金融系，经济学学士 (双学位)

2006.09-2012.07

中国科学院金属研究所，材料物理与化学专业，工学博士

2012.10-2014.09

京都大学，日本学术振兴会外国人特别研究员(JSPS Fellow)

2014.10-2014.12

京都大学，项目研究员及项目助理教授

2015.01-至今

中国科学院金属研究所，副研究员

< 荣誉及奖励 >

中科院金属所“SYNL青年创新奖”二等奖，2015年

日本日刊工业新闻报纸及日本京都大学官网报道本人研究成果，2015年

“所优秀学者”，中科院金属研究所，2015年

日本学术振兴会外国人特别研究员(JSPS Fellow)，2012年

师昌绪奖学金二等奖，中科院金属研究所，2012年

国家奖学金一等奖，天津大学，2004-2005学年

< 研究方向 >

ç 剧烈塑性变形：ECAP、HPT、ARB等。

ç 金属材料强韧化：Cu-Al合金、Cu-Zn合金、TWIP钢、316L不锈钢等。

ç 双相复合材料：Cu-Ag原位复合材料。

ç 疲劳性能优化：金属材料疲劳性能优化。

ç 高性能金属材料制备：Cu合金、Ti合金、Al合金、钢铁材料等。

< 主要成果 >

以第一(通讯)作者身份在Acta Materialia (3篇)，Scripta Materialia (5篇)，Scientific Reports (2篇)，Materials Research Letters (1篇)，Materials Science and Engineering A (4 篇)，Metallurgical and Materials Transactions A (2篇) 等SCI期刊上发表学术论文20余篇，被引用300余次。

< 在研项目 >

主持多项基金，包括中国科学院金属研究所“所优秀学者”启动基金;沈阳材料科学国家(联合)实验室青年人才项目;国家自然科学青年基金项目。

< 期刊论文 >

1. Peng Xue, Zhiye Huang, Beibei Wang, Yanzhong Tian, Wenguang Wang, Bolv Xiao and Zongyi Ma#, High Cycle Fatigue Behavior of Ultrafine Grained Pure Cu with Stable Structure, Science China Materials 59 (2016) 531-537.

2. Lijia Zhao#, Nokeun Park, Yanzhong Tian, Shuai Chen, Akinobu Shibata, Nobuhiro Tsuji, Novel thermomechanical processing methods for achieving ultragrain refinement of low-carbon steel without heavy plastic deformation, Materials Research Letters 4 (2016) in press.

3. Rui Liu, Yanzhong Tian#, Zhenjun Zhang, Xianghai An, Peng Zhang, Zhefeng Zhang#, Exceptional high fatigue strength in Cu-15at.%Al alloy with moderate grain size, Scientific Reports 6(2016) 27433. (通讯作者)

4. Y.Z. Tian#, L.J. Zhao, N. Park, R. Liu, P. Zhang, Z.J. Zhang, A. Shibata, Z.F. Zhang, N. Tsuji, Revealing the deformation mechanisms of Cu-Al alloys with high strength and good ductility, Acta Materialia 110 (2016) 61-72.

5. Yanzhong Tian#, Akinobu Shibata, Zhefeng Zhang, Nobuhiro Tsuji, Ductility sensitivity to stacking fault energy and grain size in Cu-Al alloys, Materials Research Letters 4 (2016) 112-117.

6. H.K. Yang, Y.Z. Tian#, Z.J. Zhang, Z.F. Zhang#, Different strain rate sensitivities between Fe-22Mn-0.6C and Fe-30Mn-3Si-3Al twinning-induced plasticity steels, Materials Science and Engineering A 655 (2016) 251-255. (通讯作者)

7. Y.Z. Tian#, L.J. Zhao, S. Chen, A. Shibata, Z.F. Zhang, N. Tsuji#, Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes, Scientific Reports 5(2015)16707.

8. H. Li#, S. Gao, Y. Tian, D. Terada, A. Shibata, N. Tsuji, Influence of tempering on mechanical properties of ferrite and martensite dual phase steel, Materials Today: Proceedings 2S (2015) S667-671.

9. Y.Z. Tian#, Y. Bai, M.C. Chen, A. Shibata, D. Terada, N. Tsuji, Enhanced strength and ductility in an ultrafine-grained Fe-22Mn-0.6C austenitic steel having fully recrystallized structure, Metallurgical and Materials Transactions A 45 (2014) 5300-5304.

10. S. Chen#, A. Shibata, L.J. Zhao, S. Gao, Y.Z. Tian, N. Tsuji, Microstructural evolution of metastable austenitic steel during high-pressure torsion and subsequent heat treatment, IOP Conference Series: Materials Science and Engineering 63 (2014) 012053.

11. Y.Z. Tian#, L.J. Zhao, S. Chen, D. Terada, A. Shibata, N. Tsuji, Optimizing strength and ductility in Cu-Al alloy with recrystallized nanostructures formed by simple cold rolling and annealing, Journal of Materials Science 49 (2014) 6629-6639.

12. Y.Z. Tian, Z.F. Zhang#, T.G. Langdon, Achieving homogeneity in a two-phase Cu-Ag composite during high-pressure torsion, Journal of Materials Science 48 (2013) 4606-4612.

13. Y.Z. Tian, J. Freudenberger, R. Pippan, Z.F. Zhang#, Formation of nanostructure and abnormal annealing behavior of a Cu-Ag-Zr alloy processed by high-pressure torsion, Materials Science and Engineering A 568 (2013) 184-194.

14. Y.Z. Tian, Z.F. Zhang#, Stability of interfaces in a multilayered Ag-Cu composite during cold rolling, Scripta Materialia 68 (2013) 542-545.

15. Y.Z. Tian, J.J. Li, P. Zhang, S.D. Wu, Z.F. Zhang#, M. Kawasaki, T.G. Langdon, Microstructures, strengthening mechanisms and fracture behavior of Cu-Ag alloys processed by high-pressure torsion, Acta Materialia 60 (2012) 269-281.

16. Y.Z. Tian, Z.F. Zhang#, Bulk eutectic Cu-Ag alloys with abundant twin boundaries, Scripta Materialia 66 (2012) 65-68.

17. Y.Z. Tian, S.D. Wu, Z.F. Zhang#, R.B. Figueiredo, N. Gao, T.G. Langdon, Microstructural evolution and mechanical properties of a two-phase Cu–Ag alloy processed by high-pressure torsion to ultrahigh strains, Acta Materialia 59 (2011) 2783-2796.

18. Y.Z. Tian, S.D. Wu, Z.F. Zhang#, R.B. Figueiredo, N. Gao, T.G. Langdon, Strain hardening behavior of a two-phase Cu-Ag alloy processed by high-pressure torsion, Scripta Materialia 65 (2011) 477-480.

19. Y.Z. Tian, S.D. Wu, Z.F. Zhang#, R.B. Figueiredo, N. Gao, T.G. Langdon, Comparison of microstructures and mechanical properties of a Cu–Ag alloy processed using different severe plastic deformation modes, Materials Science and Engineering A 528 (2011) 4331-4336.

20. D.R. Fang#, Y.Z. Tian, Q.Q. Duan, S.D. Wu, Z.F. Zhang, N.Q. Zhao, J.J. Li, Effects of equal channel angular pressing on the strength and toughness of Al–Cu alloys, Journal of Materials Science 46 (2011) 5002-5008.

21. Y.Z. Tian, X.H. An, S.D. Wu, Z.F. Zhang#, R.B. Figueiredo, N. Gao, T.G. Langdon, Direct observations of microstructural evolution in a two-phase Cu–Ag alloy processed by high-pressure torsion, Scripta Materialia 63 (2010) 65-68.

22. Y.Z. Tian, W.Z. Han, H.J. Yang, S.X. Li, S.D. Wu, Z.F. Zhang#, Shear banding observations in Cu–16 wt.% Ag alloy subjected to one-pass equal channel angular pressing, Scripta Materialia 62 (2010) 183-186.

23. Y.Z. Tian, Q.Q. Duan, H.J. Yang, H.F. Zou, G. Yang, S.D. Wu, Z.F. Zhang#, Effects of route on microstructural evolution and mechanical properties of Cu-8wt.%Ag alloy processed by equal channel angular pressing, Metallurgical and Materials Transactions A 41 (2010) 2290-2303.

24. Y.Z. Tian, Z.F. Zhang#, Z.G. Wang, Cyclic deformation and fatigue cracking behaviors of Cu-28wt%Ag binary alloy, Philosophical Magazine 89 (2009)1715-1730.

25. Y.Z. Tian, Z.F. Zhang#, Microstructures and tensile deformation behavior of Cu–16 wt.%Ag binary alloy, Materials Science and Engineering A 508 (2009) 209-213.

26. 张哲峰#，张鹏，田艳中，张青科，屈伸，邹鹤飞，段启强，李守新，王中光(邀请综述)，金属材料疲劳损伤的界面效应，金属学报 45 (2009) 788-800.

< 会议论文 >

1. Y.Z. Tian#, S. Chen, L.J. Zhao, D. Terada, A. Shibata, N. Tsuji, Strain hardening behavior of Cu-Al alloy with a low stacking fault energy, 35th Risø International Symposium on Materials Science, Roskilde, Denmark, 2014, Sep.1-5, pp.455-462.

2. S. Chen#, L. Zhao, M. Chen, Y. Tian, S. Gao, A. Shibata, N. Tsuji, Tensile behavior of ultrafine-grained metastable austenite in an Fe-24Ni-0.3C alloy, 35th Risø International Symposium on Materials Science, Roskilde, Denmark,2014, Sep.1-5, pp.237-244.

3. L. Zhao#, N. Park, S. Chen, Y. Tian, A. Shibata, N. Tsuji, Nanostructured ferrite formation in low-carbon steel through thermo-mechanical controlled processing, 35th Risø International Symposium on Materials Science, Roskilde, Denmark, 2014, Sep.1-5, pp.529-536.

< 参加会议 >

1. Y.Z. Tian, N. Tsuji, Z.F. Zhang, Tensile deformation mechanisms of Cu-Al alloys with high strength and good ductility, THERMEC’2016, May 29-June 3, 2016, Graz, Austria (Invited).

2. Y.Z. Tian, D.R. Fang, S.D. Wu, Z.F. Zhang, Tensile strength and fracture behavior of Al-Cu alloy subjected to ECAP, 6th KIMS-IMR joint Symposium on light alloys, Sep.11, 2015, Shenyang, China (Invited).

3. Y.Z. Tian, S. Chen, L.J. Zhao, D. Terada, A. Shibata, N. Tsuji, Strain hardening behavior of Cu-Al alloy with a low stacking fault energy, 35th Risø International Symposium on Materials Science, Sep.1-5, 2014, Roskilde, Denmark.

4. Y.Z. Tian, D. Terada, A. Shibata, N. Tsuji, Optimizing strength and ductility in Cu-Al alloy with fine homogeneous recrystallized structure by simple cold rolling and annealing, 2014 TMS 143rd Annual Meeting & Exhibition, Feb. 16-20, 2014, San Diego, USA.

5. Y.Z. Tian, D. Terada, A. Shibata, N. Tsuji, Optimizing strength and ductility in Cu-Al alloy with fine homogeneous recrystallized structure by simple cold rolling and annealing, 2013 Fall Annual (153rd) Meeting of The Japan Institute of Metals and Materials, Sep. 17-19, 2013, Kanazawa, Japan.

6. Y.Z. Tian, Z.F. Zhang, R.B. Figueiredo, N. Gao, T.G. Langdon, Homogenizing Process and Strain Hardening Behavior of a Two-Phase Cu-Ag Alloy Processed by High-Pressure Torsion (HPT), 2012 TMS 141st Annual Meeting & Exhibition, Mar. 10-15, 2012, Orlando, USA.

7. Y.Z. Tian, Z.F. Zhang, R.B. Figueiredo, N. Gao, T.G. Langdon, Investigation on the microstructure and mechanical properties of a Cu-Ag alloy processed by ECAP and HPT, The 5th International Conference on Nanomaterials by Severe Plastic Deformation, Mar. 21-25, 2011, Nanjing, China.

8. 田艳中，张哲峰, Tsuji Nobuhiro。高强高塑铜铝合金变形机制研究，国家自然科学基金委员会第四届(合肥)金属材料青年论坛，2016.05.09-2016.05.10，合肥。

9. 田艳中，张哲峰。铜银双相合金强化机制及极值强度，第六届海内外中华青年材料科学技术研讨会暨第十五届全国青年材料科学技术研讨会，2015.10.16-2015.10.19，重庆(邀请报告)。

10. 田艳中，张哲峰。第十二届全国青年材料科学与技术研讨会，2009, 南京。

11. 田艳中，张哲峰。第三届全国背散射电子衍射(EBSD)技术学术交流研讨会，2008, 上海。