导师姓名：万敏
性别：
人气指数：61

所属院校：西北工业大学
所属院系：机电学院
职称：教授
导师类型：
招生专业：航空宇航科学与技术


通讯方式 :
办公电话：**-1212
电子邮件：m.wan@nwpu.edu.cn


个人简述 :
教育部新世纪优秀人才，加拿大英属哥伦比亚大学(UBC)访问学者，陕西省青年科技新星，全国优秀博士学位论文提名奖获得者(No. 3)，陕西省科学技术奖一等奖获得者，西北工业大学翱翔青年学者，西北工业大学优秀青年教师，2014“Elsevier中国高被引学者”。2005年4月留校工作，2007年4月任讲师，2009年破格晋升副教授，2012年遴选为博士生导师，2014年晋升为教授。

科研工作 :
从事专业为航空宇航制造工程，在Int. J. Mach. Tools Manuf., ASME J. Manuf. Sci. Eng.、J. Mater. Process. Technol.、Int. J. Adv. Manuf. Technol.、Appl. Math. Modelling、《航空学报》等国内外知名学术期刊上累计发表学术论文54余篇，Sci收录30篇，H因子总计为17，其中2010至今(2015.09.16)H因子为16(数据源于Google Scholar)，其中在切削领域顶级期刊 ASME J. Manuf. Sci. Eng.、Int. J. Mach. Tools Manuf.发表学术论文19篇，2篇论文被评为Elsevier“最热门论文”，1篇论文被评为《航空学报》1995-2015年高被引论文，入选2014“Elsevier中国高被引学者”，获授权发明专利10项。???? 主要研究方向为先进制造工艺中的基本力学问题：1、高效高精密加工理论2、切削过程运动、几何及机理分析与建模3、切削系统稳定性评估与主动控制4、高性能切削刀具设计理论5、机床运动建模与轮廓误差控制 以下为第一作者代表性论文，统计数据截止于2015年9月16日。[1] M. Wan Y. Altintas Mechanics and Dynamics of Thread Milling Process, Int. J. of Mach. Tools Manuf. 87 (2014) 16-26.[2] M. Wan, M.S. Lu, W.H. Zhang, Y. Yang, A New Ternary-Mechanism Model For The Prediction of Cutting Forces in Flat End Milling, Int. J. Mach. Tools Manuf. 57 (2012) 34-45. [3] M. Wan, Y.T. Wang, W.H. Zhang, Y. Yang, J.W. Dang, Prediction of Chatter Stability For Multiple-Delay Milling System Under Different Cutting Force Models, Int. J. Mach. Tools Manuf. 51 (2011) 281-295. [4] M. Wan, W.H. Zhang, J.W. Dang, Y Yang, A Unified Stability Prediction Method For Milling Process With Multiple Delays, Int. J. Mach. Tools Manuf. 50 (2010) 29-41. [5] M. Wan, W.H. Zhang, J.W. Dang, Y Yang, New Procedures For Calibration of Instantaneous Cutting Force Coefficients and Cutter Runout Parameters in Peripheral Milling, Int. J. Mach. Tools Manuf. 49 (2009) 1144-1151.[6] M. Wan, W.H. Zhang, Systematic Study On Cutting Force Modelling Methods For Peripheral Milling, Int. J. Mach. Tools Manuf. 49 (2009) 424-432.[7] M. Wan, W.H. Zhang, G.H. Qin, Z.P. Wang, Strategies For Error Prediction and Error Control in Peripheral Milling of Thin-Walled Workpiece, Int. J. Mach. Tools Manuf. 48 (2008) 1366-1374. [8] M. Wan, W.H. Zhang, G. Tan, G.H. Qin, An In-Depth Analysis of The Synchronization Between The Measured and Predicted Cutting Forces For Developing Instantaneous Milling Force Model, Int. J. Mach. Tools Manuf. 47 (2007) 2018-2030. [9] M. Wan, W.H. Zhang, G.H. Qin, G. Tan, Efficient Calibration of Instantaneous Cutting Force Coefficients and Runout Parameters For General End Mills, Int. J. Mach. Tools Manuf. 47 (2007) 1767-1776.[10] M. Wan, W.J. Pan, W.H. Zhang, Y.C. Ma, Y. Yang A Unified Instantaneous Cutting Force Model For Flat End Mills With Variable Geometries, J. of Mater. Process. Technol 214 (2014) 641-650.[11] M. Wan, W.H. Zhang, Y. Yang, Phase Width Analysis of Cutting Forces Considering Bottom Edge Cutting and Cutter Runout Calibration in Flat End Milling of Titanium Alloy, J. Mater. Process. Technol. 211 (2011) 1852-1863. [12] M. Wan, W.H. Zhang, G. Tan, G.H. Qin, Systematic Simulation Procedure of Peripheral Milling Process of Thin-Walled Workpiece, J. Mater. Process. Technol. 197 (2008) 122-131.[13] M. Wan, W.H. Zhang, Efficient Algorithms For Calculations of Static Form Errors in Peripheral Milling, J. Mater. Process. Technol. 171 (2006) 156-165. [14] M. Wan, W.H. Zhang, J.W. Dang, Y Yang, A Novel Cutting Force Modelling Method For Cylindrical End Mill, Appl. Math. Modelling 34 (2010) 823-836.[15] M. Wan, W.H. Zhang, Calculations of Chip Thickness and Cutting Forces in Flexible End Milling, Int. J. Adv. Manuf. Technol. 29 (2006) 637-647.[16] M. Wan, Y.C. Ma, W.H. Zhang, Y. Yang, Study On The Construction Mechanism of Stability Lobes in Milling Process With Multiple Modes. Adv. Manuf. Technol.79 (201 5)589-603.[17] M. Wan Z. Kilic, M Y. Altintas, Mechanics and Dynamics of Multifunctional Tools Asme J. Manuf. Sci. Eng.137 (2015) 011019. [18] M. Wan, W.H. Zhang, K.P. Qiu, T. Gao, Y. H. Yang, Numerical Prediction of Static Form Errors in Peripheral Milling of Thin-Walled Workpieces With Irregular Meshes, Asme J. Manuf. Sci. Eng. 127 (2005) 13-22. [19] M. Wan, W.H. Zhang, G.H. Qin, Z.P. Wang, Consistency Study On Three Cutting Force Modeling Methods For Peripheral Milling, Imeche J. Eng. Manuf. 222 (2008) 665-676. [20] M. Wan, W.H. Zhang, G. Tan, G.H. Qin, New Algorithm For Calibration of Instantaneous Cutting-Force Coefficients and Radial Run-Out Parameters in Flat End Milling, Imeche J. Eng. Manuf. 221 (2007) 1007-1019. [21] M. Wan, W.H. Zhang, G. Tan, G.H. Qin, New Cutting Force Modeling Approach For Flat End Mill, Chin. J. Aero. 20 (2007) 282-288.