导师姓名：喻言
性别：男
人气指数：1103

所属院校：大连理工大学
所属院系：生物医学工程系
职称：教授
导师类型：硕导/博导
招生专业：通信与信息系统、电路与系统
研究领域： 无线传感器网络关键问题（路由、定位、安全、跟踪）
无线控制结构健康监测（海洋环境、深... [展开]


研究领域： 无线传感器网络关键问题（路由、定位、安全、跟踪）
无线控制结构健康监测（海洋环境、深海平台、桥梁等基础设施）
智能仪器仪表
[收起]




通讯方式 :
办公电话：**-2411
电子邮件：yuyan@dlut.edu.cn


个人简述 :
研究内容着重在微细电火花的电极损耗补偿，大深径比微孔加工；微细超声波加工的工具损耗机理等。

发表论文国内外期刊论文64篇，国内外会议论文83篇。

代表论文有

1.RimaoZou,ZuyuanYu,ChengyangYan,JianzhongLi,XinLiu,WenjiXu,Microelectricaldischargemachininginnitrogenplasmajet,PrecisionEngineering,Availableonline24August2017
2.RimaoZou,ZuyuanYu?,WeiLi,MeigangGuo,JianzhongLi,InfluenceofporousstructureonthemachiningperformanceofmicroEDM,JournalofMaterialsProcessingTechnology232(2016),43–51
3.XuejieGuo,ZuyuanYu,ZhongweiLv,JianzhongLi,WataruNatsu,OptimizationofPlanetaryMovementParametersforMicroholeDrillingbyMicro-ElectricalDischargeMachining,JournalofMicro-andNano-Manufacturing(TransactionsoftheASME),SEPTEMBER2013,Vol.1/031007-1.
4.Jian-ZhongLi,LuXiao,HuiWang,Hui-LanYu,Zu-YuanYu,Toolwearcompensationin3DmicroEDMbasedonthescannedarea,PrecisionEngineeringVol.37,Issue3,July(2013)753-757.
5.J.Z.Li,F.H.Shen,Z.Y.Yu,W.Natsu,InfluenceofmicrostructureofalloyonthemachiningperformanceofmicroEDM,Surface&CoatingsTechnology,Volume228,Supplement1,15August2013,PagesS460–S465
6.LiJianzhong,YinGuoqiang,WangCong,GuoXuejieandYuZuyuan,PredictionofaspectratioofamicroholedrilledbyEDM,JournalofMechanicalScienceandTechnology27(1)(2013)185~190.
7.ZuyuanYu(2),ChunshiMa,ChengmingAn,JianzhongLi,DongmingGuo,PredictionoftoolwearinmicroUSM,AnnalsoftheCIRP-ManufacturingTechnology2012,61/1,227–230
8.WataruNatsu,HisashiNakayama,andZuyuanYu,ImprovementofECMCharacteristicsbyApplyingUltrasonicVibration,InternationalJournalofPrecisionEngineeringandManufacturing,2012,Vol.13,No.7,pp.1131-1136.
9.J.Li,T.Wu,Z.Yu,L.Zhang,G.Chen,D.Guo,MicroMachiningofPre-sinteredCeramicGreenBody,JournalofMaterialsProcessingTechnology,212(2012)pp.571-579.
10.G.Yin,Z.Yu,C.An,J.Li,ModelingAspectRatioofaMicroEDMHole,AdvancedinMaterialsResearchVols.126-128(2010),829-834.
11.Hui-LanYu,Ji-JieLuan,Jian-ZhongLi,Yu-ShengZhang,Zu-YuanYuandDong-MingGuo,Anewelectrodewearcompensationmethodofimprovingperformancein3DmicroEDMmilling,JournalofMicromechanicsandMicroengineering20(2010)055011,1-7.
12.Z.Y.Yu,Y.Zhang,J.Li,J.Luan,F.Zhao,D.Guo,Highaspectratiomicro-holedrillingaidedwithultrasonicvibrationandplanetarymovementofelectrodebymicro-EDM,AnnalsoftheCIRP,Vol.58/1,2009,213-216.
13.Z.Yu,X.Hu,K.P.Rajurkar,InfluenceofDebrisAccumulationonMaterialRemovalandSurfaceroughnessinMicroUltrasonicMachiningofSilicon,AnnalsoftheCIRP,2006,Vol.55/1,2006,201-204.
14.Z.Yu,K.P.RajurkarandA.Tandon,Studyof3DMicroUltrasonicMachining,JournalofManufacturingScienceandEngineering(ASME),Vol.126,Nov.,2004,727-732.
15.J.Narasimhan,Z.Yu,K.P.RajurkarToolWearCompensationandPathGenerationinMicroandMacroEDM,JournalofManufacturingProcesses,Vol.7,No.1,2005,75-82.
16.Z.Y.Yu,J.KozakandK.P.Rajurkar,ModellingandSimulationofMicroEDMProcess,AnnalsoftheCIRP,Vol.52/1,2003,143-146.
17.Z.Yu,K.PRajurkarandH.Shen,HighAspectRatioandComplexShapedBlindMicroHolesbyMicroEDM,AnnalsoftheCIRP,Vol.51/1,2002,359-362.
18.K.P.Rajurkar,Z.Y.Yu,MicroEDMCanProduceMicroParts,ManufacturingEngineering,Vol.125,No.5,Nov.2000.
19.K.P.RajurkarandZ.Y.Yu,3DMicro-EDMUsingCAD/CAM,AnnalsoftheCIRP,Vol.49/1,2000,127-130.
20.Z.Y.Yu,T.MasuzawaandM.Fujino,Micro-EDMforThreeDimensionalCavities,--DevelopmentofUniformWearMethod--,AnnalsoftheCIRP,Vol.47/1,1998,169-172.

科研工作 :
研究内容着重在微细电火花的电极损耗补偿，大深径比微孔加工；微细超声波加工的工具损耗机理等。

发表论文国内外期刊论文64篇，国内外会议论文83篇。

代表论文有

1.RimaoZou,ZuyuanYu,ChengyangYan,JianzhongLi,XinLiu,WenjiXu,Microelectricaldischargemachininginnitrogenplasmajet,PrecisionEngineering,Availableonline24August2017
2.RimaoZou,ZuyuanYu?,WeiLi,MeigangGuo,JianzhongLi,InfluenceofporousstructureonthemachiningperformanceofmicroEDM,JournalofMaterialsProcessingTechnology232(2016),43–51
3.XuejieGuo,ZuyuanYu,ZhongweiLv,JianzhongLi,WataruNatsu,OptimizationofPlanetaryMovementParametersforMicroholeDrillingbyMicro-ElectricalDischargeMachining,JournalofMicro-andNano-Manufacturing(TransactionsoftheASME),SEPTEMBER2013,Vol.1/031007-1.
4.Jian-ZhongLi,LuXiao,HuiWang,Hui-LanYu,Zu-YuanYu,Toolwearcompensationin3DmicroEDMbasedonthescannedarea,PrecisionEngineeringVol.37,Issue3,July(2013)753-757.
5.J.Z.Li,F.H.Shen,Z.Y.Yu,W.Natsu,InfluenceofmicrostructureofalloyonthemachiningperformanceofmicroEDM,Surface&CoatingsTechnology,Volume228,Supplement1,15August2013,PagesS460–S465
6.LiJianzhong,YinGuoqiang,WangCong,GuoXuejieandYuZuyuan,PredictionofaspectratioofamicroholedrilledbyEDM,JournalofMechanicalScienceandTechnology27(1)(2013)185~190.
7.ZuyuanYu(2),ChunshiMa,ChengmingAn,JianzhongLi,DongmingGuo,PredictionoftoolwearinmicroUSM,AnnalsoftheCIRP-ManufacturingTechnology2012,61/1,227–230
8.WataruNatsu,HisashiNakayama,andZuyuanYu,ImprovementofECMCharacteristicsbyApplyingUltrasonicVibration,InternationalJournalofPrecisionEngineeringandManufacturing,2012,Vol.13,No.7,pp.1131-1136.
9.J.Li,T.Wu,Z.Yu,L.Zhang,G.Chen,D.Guo,MicroMachiningofPre-sinteredCeramicGreenBody,JournalofMaterialsProcessingTechnology,212(2012)pp.571-579.
10.G.Yin,Z.Yu,C.An,J.Li,ModelingAspectRatioofaMicroEDMHole,AdvancedinMaterialsResearchVols.126-128(2010),829-834.
11.Hui-LanYu,Ji-JieLuan,Jian-ZhongLi,Yu-ShengZhang,Zu-YuanYuandDong-MingGuo,Anewelectrodewearcompensationmethodofimprovingperformancein3DmicroEDMmilling,JournalofMicromechanicsandMicroengineering20(2010)055011,1-7.
12.Z.Y.Yu,Y.Zhang,J.Li,J.Luan,F.Zhao,D.Guo,Highaspectratiomicro-holedrillingaidedwithultrasonicvibrationandplanetarymovementofelectrodebymicro-EDM,AnnalsoftheCIRP,Vol.58/1,2009,213-216.
13.Z.Yu,X.Hu,K.P.Rajurkar,InfluenceofDebrisAccumulationonMaterialRemovalandSurfaceroughnessinMicroUltrasonicMachiningofSilicon,AnnalsoftheCIRP,2006,Vol.55/1,2006,201-204.
14.Z.Yu,K.P.RajurkarandA.Tandon,Studyof3DMicroUltrasonicMachining,JournalofManufacturingScienceandEngineering(ASME),Vol.126,Nov.,2004,727-732.
15.J.Narasimhan,Z.Yu,K.P.RajurkarToolWearCompensationandPathGenerationinMicroandMacroEDM,JournalofManufacturingProcesses,Vol.7,No.1,2005,75-82.
16.Z.Y.Yu,J.KozakandK.P.Rajurkar,ModellingandSimulationofMicroEDMProcess,AnnalsoftheCIRP,Vol.52/1,2003,143-146.
17.Z.Yu,K.PRajurkarandH.Shen,HighAspectRatioandComplexShapedBlindMicroHolesbyMicroEDM,AnnalsoftheCIRP,Vol.51/1,2002,359-362.
18.K.P.Rajurkar,Z.Y.Yu,MicroEDMCanProduceMicroParts,ManufacturingEngineering,Vol.125,No.5,Nov.2000.
19.K.P.RajurkarandZ.Y.Yu,3DMicro-EDMUsingCAD/CAM,AnnalsoftheCIRP,Vol.49/1,2000,127-130.
20.Z.Y.Yu,T.MasuzawaandM.Fujino,Micro-EDMforThreeDimensionalCavities,--DevelopmentofUniformWearMethod--,AnnalsoftheCIRP,Vol.47/1,1998,169-172.

教育背景 :
2002.92006.7哈尔滨工业大学防灾减灾工程与防护工博士1999.92001.10哈尔滨工业大学建筑技术科学硕士1995.91999.7哈尔滨建筑大学工业自动化学士